format:encoding
[section1]
key1 = value1
key2 = value2
...
[section2]
key3 = value3
...
The file format must be described always at the beginning of the file. The string indicating the current vehicle sound file format is
BveTs Vehicle Sound 3.00
The character encoding of the file may be described after the file format. If the character encoding is omitted, UTF-8 is used.
For example, the file header of ISO 8859-1 is shown below:
BveTs Vehicle Sound 3.00:ISO_8859-1
Text from a sharp ( # ) or a semicolon ( ; ) until the end of the line is a comment, and is ignored.
Setting items are grouped into sections, similar to the INI file.
Sectioin name | Description |
Run | 車輪の転動音 |
Flange | 曲線走行時の軋り音 |
Motor | モーターに電流が流れたときの音 |
Joint | 分岐器通過時の継ぎ目など、走行速度に応じて 1 回再生される音 |
Brake | ブレーキ系の圧力が変動する音 |
Compressor | 空気圧縮機の作動音 |
AirSpring | 空気ばねの圧力が変動する音 |
Breaker | 断流器の作動音 |
Horn | 警笛 |
Door | 客室ドアが開閉する音 |
Ats | ATS プラグインによって制御される音 |
Buzzer | 車掌からの合図 |
Pilot Lamp | 運転士知らせ灯の作動音 |
Brake Handle | ブレーキ弁の操作音 |
Master Controller | 主ハンドルの操作音 |
Reverser | レバーサーの操作音 |
Others | その他 |
車輪の転動音
キーは 0 以上の整数
曲線走行時の軋り音
キーは 0 以上の整数
モータ音
キーは 0 以上の整数
分岐器通過時の継ぎ目など、走行速度に応じて 1 回再生される音
キーは 0 以上の整数
ブレーキ系の圧力が変動する音
BcRelease
ブレーキ シリンダ圧の緩解音
BcReleaseFull
ブレーキ シリンダ圧が完全に緩解する音
Emergency
ブレーキ管の急減圧音
空気圧縮機の作動音
Attack
起動 5 秒間の音
Loop
作動中の音
Release
停止する音
空気ばねの圧力が変動する音
LeftRelease
左側空気ばねの排気音
RightRelease
左側空気ばねの排気音
LeftApply
左側空気ばねの給気音
RightApply
左側空気ばねの給気音
断流器の作動音
On
回路を閉じる音
Off
回路を開く音
警笛
Primary
警笛 1
PrimaryRelease
警笛 1 余韻
Secondary
警笛 2
SecondaryRelease
警笛 2 余韻
客室ドアが開閉する音
OpenLeft
左側のドアが開く音
OpenRight
右側のドアが開く音
CloseLeft
左側のドアが閉まる音
CloseRight
右側のドアが閉まる音
ATS プラグインによって制御される音
キーは 0 ~ 255 の整数
車掌からの合図
Correct
「停止位置直せ」の合図
運転士知らせ灯の作動音
On
点灯する音
Off
滅灯する音
ブレーキ弁の操作音
Apply
込める方向に動かしたときの音
Release
緩める方向に動かしたときの音
Min
緩め位置にしたときの音
Max
非常位置にしたときの音
主ハンドルの操作音
Up
ノッチを上げたときの音
Down
ノッチを下げたときの音
Max
フルノッチにしたときの音
Min
切位置にしたときの音
レバーサーの操作音
On
前位置か後位置にしたときの音
Off
切位置にしたときの音
その他の音
Noise
常時連続再生される音
Shoe
制輪子軋り音
© 2015 mackoy